Direct USD Pricing For Phoenix Roof Systems

A new asphalt shingle roof installation runs 11,800 to 24,900 USD per project across the Phoenix metropolitan area. The total depends on overall pitch, total square footage, decking condition, and whether multiple layers of old shingles must be stripped down to bare timber sheathing.

The scope covers full tear-off of old shingles, replacement of heat-delaminated sheathing boards, fastening heavy-duty synthetic underlayment, installing galvanized valley metal, and securing fiberglass architectural shingles designed to withstand desert thermal shock.

Roof repairs run 450 to 2,800 USD per project. When leaks occur around pipe boots, chimney curbs, HVAC flashing, or valley corners while the remaining roof slope has sound underlayment, a targeted repair is the sensible, economical solution.

We pull surrounding tiles or shingles, inspect the timber deck for rot, replace dry-rotted fascia or deck sheathing, lay fresh membrane, and fabricate custom 26-gauge galvanized flashing. We will not sell a full roof replacement when a targeted repair properly seals the water intrusion point.

A foam roof recoat costs 1.5 to 3.5 USD per sq ft. Recoating protects the polyurethane foam substrate against Phoenix ultraviolet radiation before chalking, hail, or bird damage exposes the underlying foam cell structure.

We wash off heavy desert silt, repair localized scars and scupper transitions with elastomeric sealant, and roll or spray a seamless coat of high-solids silicone coating or acrylic coating. Recoating requires dry, bonded foam; saturated or blistered foam must be scarified and resprayed.

Underlayment replacement costs 4 to 7 USD per sq ft. Phoenix concrete and clay tiles are cured masonry that can easily survive forty to fifty years of harsh desert sun, but the organic felt beneath them bakes brittle and cracks within twelve to twenty years.

Instead of charging for new tiles, our crew carefully lifts the existing tiles, stacks them along the eaves and ridges, strips the failed underlayment down to clean timber, installs high-temperature modified underlayment and new batten strips, and then relays the original tiles with fresh mortar closures.

A new concrete tile roof installation runs 7 to 12 USD per sq ft. Concrete tile is the standard across Phoenix residential neighborhoods due to its thermal mass, high fire rating, and wind-uplift resistance against violent monsoon downdrafts.

The quote covers structural framing check, dual-layer high-temperature underlayment, treated wooden battens, corrosion-resistant valley metal, galvanized drip edge, and precision placement of flat or S-profile interlocking concrete tiles.

A new clay tile roof installation costs 10 to 18 USD per sq ft. Kiln-fired natural terracotta clay offers superior color retention under blistering UV exposure and cannot fade or degrade over generations of Phoenix summers.

Because natural clay barrel tiles require careful handling and specialized mortar work along ridge caps, valleys, and rakes, labor demands are higher. We utilize reinforced high-temp self-adhering membranes, heavy gauge copper or galvanized valley pans, and hand-troweled mortar closures.

A new spray foam roof installation runs 5 to 9 USD per sq ft. Spray polyurethane foam creates a monolithic, seamless barrier across low-slope and flat decks, eliminating joints, seams, and mechanical fastener penetrations where water traditionally enters.

Closed-cell polyurethane delivers an R-value of 6.5 per inch of thickness, dramatically reducing commercial cooling bills. The foam is custom-tapered during application to channel standing water directly to scuppers and drains, then sealed under two protective coats of UV-reflective silicone or acrylic elastomeric coating.